Sharp FODC550 - Manual (Page 64)

62
7 Chapter 7
The user settings allow you to customize machine settings to better meet your
needs.
USER PROGRAMS
The user settings consist of the following items.
To change a user program setting, see "SELECTING A SETTING FOR A USER
PROGRAM" (p.67).
Copy mode
For the user programs in fax mode, see the Operation Manual (for
facsimile).
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
1 AUTO CLEAR
1: 10 SEC.
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF
• Auto clear time automatically
returns the copy settings to
the initial settings (p.12) if no
keys are pressed for a preset
period of time following the
end of a copy job.
• This program is used to select
the period of time. Auto clear
time can also be disabled.
2 PREHEAT MODE
1: 30 SEC.
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.
• This function automatically
switches the machine to a low
power consumption state if
the set duration of time
elapses without the machine
being used when the power is
on. The power save indicator
lights up, however, the keys
on the operation panel can be
used. Normal operation
automatically resumes when
a key on the operation panel
is pressed, an original is
placed, a print/fax job is
received.
3 AUTO SHUT-OFF
1: ON
2: OFF
• Use this setting to enable or
disable auto power shut-off
mode.
Note
USER SETTINGS
FO-DC550_Copy(Sec).book 62 ページ ２００４年３月２５日 木曜日 午後３時４４分