Sharp FODC550 - Manual (Page 66)

USER SETTINGS
64
8
ROTATE ORIG.
IMAGE 1: ON
2: OFF
• When two-sided copying is
performed, this function
rotates the image on the back
of the original. This is
convenient when binding the
copies at the top (tablet
binding).
9
AE/TEXT
RESOLUTION 1: 300dpi
2: 600dpi
• This setting is used to change
the copy resolution in AUTO
and TEXT mode from 600 x
300 dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality
mode is used.
10
2-SIDED COPY
MODE 1: HI-SPEED
2: NORMAL
• If the memory fills up when
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
11 MARGIN WIDTH
1: 1/4"
2: 1/2"
3: 3/4"
4: 1"
• Use this setting to set the
margin width.
12
MEM. FOR
PRINTER
1: 30%
2: 40%
3: 50%
4: 60%
5: 70% • Use this to change the
proportion of machine
memory used for printer
mode.
13
AUTO KEY
REPEAT 1: ON
2: OFF
• Use this setting to select
whether or not holding down a
key causes repeated input of
the key. For keys that
normally cause a set value to
decrease or increase when
held down (for example, the
[
] key ( ) or [ ] key
( )), this program can be
used to have the set value not
change when the key is held
down.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
FO-DC550_Copy(Sec).book 64 ページ ２００４年３月２５日 木曜日 午後３時４４分