Sharp FODC550 - Manual (Page 85)

TROUBLESHOOTING AND MAINTENANCE
83
8
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the roller.
SCAN HEAD LOCKING SWITCH
The scan head locking switch is under the original table. If the switch is locked ( ) ,
the unit will not operate. Unlock the switch ( ) as shown below.
Open and close the RSPF to clear the error indicator. "RETURN X
ORIGINAL(S) START TO RESUME" will appear in the display. Return
the indicated number of pages to the document feeder tray.
Press the
[START] key ( ) to resume copying.
Note
Lock Unlock
Grasp here and turn in
the direction of the arrow.
!08-troubleshooting.fm 83 ページ ２００４年３月２６日 金曜日 午前８時４７分