SATO XL400/410 - Manual (Page 127)

Programming Manual 3. Command Code Quick Reference
SATO RISC Printers 127
b = Font width (50-999 dots*)
c = Font height (50-999 dots*)
d = Font variation (0-9) as follows:
0 Standard
1 Standard open (outlined)
2 Gray (mesh) pattern 1
3 Gray (mesh) pattern 2
4 Gray (mesh) pattern 3
5 Standard, shadow 1
6 Standard, shadow 2
7 Standard mirror image
8 Italic
9 Italic open (outlined)
$=(data) Data for Vector font.
#Ea Print Darkness. Specifies a new print darkness set-
ting. The lightest setting is “1”.
(aaaa,bbbb Reverse Image. Reverse image from black to white
and vice versa. Units of measure are dots.
& Store Form Overlay. Stores a specified label image in
the printer’s volatile form overlay memory.
/ Recall Form Overlay. Recalls the label image from the
printer’s form overlay memory for printing.
0 (zero) Replace Data (Partial Edit). Provides the ability to
replace a specified area of the previous label with new
data.
*a Clear Print Job(s) and Memory. Clears individual
memory and buffers.
a = When not included in command, clears print jobs
in Multi-Buffer mode.
a = If included in command, specifies memory sec-
tion to be cleared
T Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
@, nn...n Off-Line/Pause. Signals the printer to go off-line after
the completion of a print job.
nn..n = Optional 32 character message to be dis-
played on the LCD.