SATO XL400/410 - Manual (Page 95)

Programming Manual 2. Command Codes
SATO RISC Printers 95
Note:
1. This command requires the Calendar Option. See your SATO rep-
resentative for more details
2. Once the year increments past “99” it will wrap back to “00”.
3. This command can only be used once per data stream.
4. The printer’s internal clock may be set through the Calendar Set
command.
5. If a print quantity of more than one label per job is used, the same
time and date will be on each label of the entire print job.