SATO XL400/410 - Manual (Page 54)

54 SATO RISC Printers
2. Command Codes Programming Manual
Graphics, Custom
Command Structure:
<ESC>Gabbbccc(data)
a:
Specifies format of data stream to follow
B Binary format
H Hexadecimal format
bbb: Number of horizontal 8 x 8 blocks (001-248)
ccc: Number of vertical 8 x 8 blocks (001-267)
(data): Hex data to describe the graphic image
Example: <ESC>GH006006
Placement: May be placed anywhere within the data stream after
the necessary position commands.
Default: None
Function:
To create and print custom graphics (logos, pictures, etc.) on a label.
The graphic image may be printed along with other printed data to en-
hance label appearance or eliminate the need for preprinted label
stock. Using a dot-addressable matrix, design the graphic image in 8
dot by 8 dot blocks, then send it in a binary format to the printer.
Input:
<Esc>A
<Esc>H100<Esc>V100
<Escsc>GH006006
FFFFFFFFFFFF FFFFFFFFFFFF C00000000003
C00000000003 C000FFFFFFF3 C00080000013
C00080000013 C0009FFFFF13 C00080000013
C00080000013 C0009FFFFF13 C00080000013
C00080000013 CO0O9FFFFFF3 C00000000003
C00000000003 C00000000003 C00000000003
C00000000003 C00000000003 C00003C00003
C00007E00003 C0000FF00003 C0000FF00003
C0000FF00003 C0000FF00003 C00007E00003
C00003C00003 C00000000003 C00000000003
C00000000003 C00000000003 C00001800003
C00003C00003 C00003C00003 C00003C00003
C00003C00003 C00003C00003 C00003C00003