SATO XL400/410 - Manual (Page 82)

82 SATO RISC Printers
2. Command Codes Programming Manual
Replace Data (Partial Edit)
Command Structure:
<ESC>0 (<ESC>zero)
Example:
See above
Placement: Must follow <ESC>A and precede all other print data
Default: None
Function:
To replace a specified area of the previous label with new data. This
command will cause the previous label to print along with any changes
specified within the current data stream.
Input:
<ESC>A
<ESC>H0025<ESC>V0020<ESC>W0BCL 608
<ESC>H0025<ESC>V0085<ESC>WB1M8485S
<ESC>H0025<ESC>V0150<ESC>WL0M8490S
<ESC>H0025<ESC>V0215 <ESC>WL1M8460S
<ESC>Q1<ESC>Z
<ESC>A
<ESC>0<ESC>H0025<ESC>V0020<ESC>WB0M8459S<ESC>Q1<ESC>Z
Output:
Note:
1. Specify the exact same parameters for the image to be replaced
as were specified in the original data stream, including rotation,
expansion, pitch, etc. This will ensure that the new data will
exactly replace the old image. If the replacement data contains