SATO XL400/410 - Manual (Page 28)

28 SATO RISC Printers
2. Command Codes Programming Manual
Bar Codes, Variable Ratio
Command Structure
<ESC>BTabbccddee
a:
Bar Code Symbol
0: Codabar
1: Code 39
2: Interleaved 2 of 5
5: Industrial 2 of 5
6: Matrix 2 of 5
bb: Narrow space in dots (01-99)
cc: Wide space in dots (01-99)
dd: Narrow bar in dots (01-99)
ee: Wide bar in dots (01-99)
Example: <ESC>BT101030103
Placement: Following print position commands and preceding
<ESC>BW
Default: Current setting
Function:
To print a bar code with a ratio other than those specified through the
standard bar code commands (B,BD, and D). This is done through in-
dividual control of each of the bar code elements (bars, spaces) as
shown above. Remember that this command only applies to the five
bar code types shown.
Input:
<ESC>A
<ESC>H0050<ESC>V0200<ESC>BD104100*M8400RV*
<ESC>H0050<ESC>V0050<ESC>BT001030103<ESC>BW03100123456
<ESC>Q1<ESC>Z
Output: