SATO XL400/410 - Manual (Page 81)

Programming Manual 2. Command Codes
SATO RISC Printers 81
Repeat Label
Command Structure:
<ESC>C
Example:
See above
Placement: Must be placed immediately after <ESC>A and imme-
diately before <ESC>Z in its own separate data stream
Default: None
Function:
To print duplicate of the last label printed
Input:
<ESC>A
<ESC>C
<ESC>Z
Output:
A duplicate of the previous label will be printed.
Note: This command will have no effect if the power to the
printer was cycled off and back on since printing the pre-
vious label.