SATO CX208/212 - Manual (Page 10)

ROTATED FIELDS
The printers can rotate each print field in 90° increments using the Rotate command.
There are two variations of this command.
• <ESC>% - The field rotates, but the base reference point for the field
remains the same.
The following data stream will rotate the print field but will not change the base
reference point of the field:
<ESC>A<ESC>%1<ESC>V800<ESC>H200<ESC>L0202<ESC>WB1E<ESC>Q1<ESC>Z
SATO CX208/212 Printers PN 9001092 Rev. A Page 6
CX208/212 Programming Guide
“%1”
E
H=200
V=800
Base
Ref
Point
Label Feed
Direction