SATO CX208/212 - Manual (Page 36)

1. Use the Print Position commands (V and H) to locate the new
area for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable field ranges are:
Page 32 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide
CX208 CX212
Horizontal
aaaa
cccc
0001
to
0832
0001
to
1230
Vertical
bbbb
dddd
0001
to
4060
0001
to
3780