SATO CX208/212 - Manual (Page 62)

Repeat Label
Command Structure <ESC>C
Example: See above
Placement: Must be placed immediately after <ESC>A and
immediately before <ESC>Z in its own separate data
stream
Default: None
Command Function To print duplicate of the last label printed
Input to Printer <ESC>A
<ESC>C
<ESC>Z
Printer Output A duplicate of the previous label will be printed.
Special Notes 1. This command will have no effect if the power to the printer was
cycled off and back on since printing the previous label.
Page 58 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide