SATO CX208/212 - Manual (Page 9)

The diagram below illustrates the maximum print area and a sample 2 inch wide by 3
inch long label placed within this area. As can be seen, your label will be oriented in
the middle of the print head as viewed from the front of the printer. The normal
reference point is located at the H1, V1 position of the print area in the normal print
orientation (no rotation).
SATO CX208/212 Printers PN 9001092 Rev. A Page 5
Max
Print
Width
Max. Print
Length
3"
2"
Print Area
Your
Label
Label
Feed
Direction
Normal
Reference
Point
H1, V1
Adjusted
Reference
Point
H1, V1