An93 – Silicon Laboratories SI2493/57/34/15/04 User Manual

Page 107

Advertising
background image

AN93

Rev. 1.3

107

U63 (DAAC2) is a bit-mapped register with bits 3:0 reserved and should be modified through a read-modify-write
operation.

Bits 15:8 (LCS) function as an 8-bit unsigned measure of off-hook loop current with a resolution of 1.1 mA/bit.

Bits 7:4 (ACT) set the ac termination the Si3010/Si3018 presents to Tip and Ring. The ac impedance setting is
dictated by the certification requirements for the country in which the modem is used.

U65 (DAAC4) is a bit-mapped register with bits 3:0, 12:5, and 15 reserved. Bits 1:0 and 6:5 must not be changed.

Bit 14 (PWMG) = 0 (default) provides 0 dB gain to AOUT. PWMG = 1 provides a 6 dB gain to AOUT.

Bit 13 (PDN) = 0 enables the device for normal operation. PDN = 1 completely powers down both the Si3018/10
and the Si24xx chips. The bit takes effect at the carriage return of the AT command setting this bit high. Once this
bit is set, the modem must be reset via the RESET pin to become active. When reset, the modem reverts to the
default settings.

Bit 4 (PDL) = 0 (default) enables the device for normal operation. PDL = 1 powers the Si3018/10 down. This is a
test mode typically used for board-level debugging, not normal modem operation.

U65 resets to 0x00E0 with a power-on or manual reset.

4

Reserved

Must be set to zero.

3

Reserved

Must be set to zero.

2

FOH

0 = Automatic calibration timer set to 426 ms.
1 = Automatic calibration timer set to 106 ms.

1

DL

0 = Digital loopback beyond ISOcap interface.
1 = Digital loopback across ISOcap interface only.

0

Reserved

Must be set to zero.

Table 64. U63 Bit Map

Bit

Name

Function

15:8

LCS

Off-hook loop current (1.1 mA/bit).

7:4

ACT

AC Termination Select

ACT AC Termination

0000

Real 600

0011

220

 + (820  || 120 nF) and 220  + (820  || 115 nF)

0100

370

 + (620  || 310 nF)

1111

Global complex impedance

3:0

Reserved

Read returns 0011.

Table 65. U65 Bit Map

Bit

Name

Function

15

Reserved

Read returns zero.

14

PWMG

PWM gain.

0 = No gain.
1 = 6 dB gain applied to AOUT.

13

PDN

Power Down.

0 = Normal.
1 = Power Down.

Table 63. U62 Bit Map (Continued)

Advertising
This manual is related to the following products: