Silicon Laboratories SI2493/57/34/15/04 - Manual (Page 69)

AN93
Rev. 1.3 69
+GCI = X
Country settings: Automatically configure all registers for a particu-
lar country.
X
Country
9 Australia
A Austria
F Belgium
16 Brazil
1B Bulgaria
20 Canada
26 China
27 Columbia
2E Czech Republic
31 Denmark
35 Ecuador
3C Finland
3D France
42 Germany
46 Greece
50 Hong Kong
51 Hungary
53 India
57 Ireland
58 Israel
59 Italy
0 Japan
61 South Korea
69 Luxembourg
6C Malaysia
73 Mexico
7B Netherlands
7E New Zealand
82 Norway
87 Paraguay
89 Philippines
8A Poland
8B Portugal
B8 Russia
9C Singapore
9F South Africa
A0 Spain
A5 Sweden
A6 Switzerland
FE Taiwan
B4 United Kingdom
B5 United States (default)
Note: U registers are configured to Silicon Laboratories’ recommended
values. Changes may be made by writing individual registers after
sending the AT+GCI command. The +GCI command resets U
registers through U86 and S6 (in Japan) to default values before
setting country-specific values. Refer to the chart and setup tables
beginning with "6.2.2.1. Country Initialization Table" on page 134.
Table 39. Basic AT Command Set (Continued)
Command Action