Document change list, An93, Ocument – Silicon Laboratories SI2493/57/34/15/04 User Manual

Page 303: Hange, Revision 0.5 to revision 0.6, Revision 0.6 to revision 0.7, Revision 0.7 to revision 0.8, Revision 0.8 to revision 0.9, Revision 0.9 to revision 1.0, Revision 1.0 to revision 1.1

Advertising
background image

AN93

Rev. 1.3

303

D

OCUMENT

C

HANGE

L

IST

Revision 0.5 to Revision 0.6

Added Si2493 to title.

Added V.92 information.

Added V.44 information.

Added and expanded several AT+ commands.

Added U71 and U9F-UAA registers.

Corrected CTS* trigger points.

Added note for U70 configuration for Australia and
Brazil

Expanded "5.14. Legacy Synchronous DCE Mode/
V.80 Synchronous Access Mode".

Added "2.5. PCM/Voice Mode (24-Pin TSSOP and
38-Pin QFN Only)".

Added "6.4. SMS Support".

Added "6.5. Type II Caller ID/SAS Detection".

Added "6.7. Modem-On-Hold".

Added "6.12. V.92 Quick Connect".

Revision 0.6 to Revision 0.7

Added V.29 FC to Table 1.

Updated part numbers in "4.3. Bill of Materials".

Updated EE section and example code.

Updated Table 46, “U-Register Descriptions,” on
page 91.

Updated U63 bit map.

Updated U7D bit map

Updated “22.1. Country Register Settings for CTR/
TBR21 ATAAB and CTR21 Type Countries” on page
138.

Corrected New Zealand Pulse dial settings in “22.20
Country Register Settings for New Zealand” on page
147.

Updated Table 102 on page 163.

Deleted references to U69 (now for internal use
only).

Revision 0.7 to Revision 0.8

Updates to Registers CALT and GEND.

Revision 0.8 to Revision 0.9

Document format changes.

Minor text edits.

Deleted Legacy-Synchronous mode.

Updated layout guidelines.

Updated country configuration tables.

Added “Appendix C—Si3008 Supplement”.

Added “Appendix D—EPOS Application”.

Revision 0.9 to Revision 1.0

Added “Appendix D—Si3006/3009 Supplement” for
for 3006 and 3009 DAA support.

Revision 1.0 to Revision 1.1

Major revision to reflect the latest Si24xx ISOmodem
product offerings.

Added support for new product features: SPI
interface and 32.768 kHz clock input.

Added software support for parallel and SPI
interfaces.

Revision 1.1 to Revision 1.2

Correction to SPI and 32.768 kHz and SPI strapping
tables.

Added several registers.

Removed Appendix D.

Updated for Si2493/57/34/15/04 Revision D.

Added Si2493 and Si2439 configuration and voice
functions.

Revision 1.2 to Revision 1.3

Added Si2494 and Si2439 configuration and voice
functions.

Added "2.5. SSI/Voice Mode (24-Pin TSSOP and 38-
Pin QFN Only)" on page 30.

Added "5.13. EPOS (Electronic Point of Sale)
Applications" on page 125
.

Added "7. Handset, TAM, and Speakerphone
Operation" on page 173.

Added "8. Security Protocols" on page 224.

Added "9. Chinese ePOS SMS" on page 234.

Advertising
This manual is related to the following products: