Sentry Industries 5000 - Manual (Page 2)

SMC sierra monitor corporation Sentry Instruction Manual - Version 6
FMRC APPROVAL
ONLY THE FOLLOWING ITEMS, FUNCTIONS AND OPTIONS ARE FMRC* APPROVED
Sentry Model 5000 Gas Monitoring System
Controllers
Model 5000-02 Two Channel Controller
Model 5000-04 Four Channel Controller
Model 5000-08 Eight Channel Controller
Controller Options:
Model 5380-00 Rack Mount Configuration
Model 5383-00 NEMA-4X Configuration
Model 5387-00 Printer Output Software
Model 5392-00 Individual Alarm Relays
Sensor Module
Model 5100-02 Combustible Gas Sensor Module
Model 5100-05 Hydrogen Sulfide Sensor Module - EC Cell
Calibration Equipment
Model 1200-26 Calibration Gas Delivery System
Model 1290-02 Combustible Gas Cylinder
Model 5358-00 Calibration Head, Magnetic
Model 5358-01 Calibration Head, Standard
Model 5360-00 Calibration Gas Delivery Fitting
Notes:
1) FMRC Approval applies only to conventional (one cable run per sensor module) or
multiplexed (multiple sensor modules per cable) installations. Apparatus must be
installed in accordance with National Electrical Code.
2) FMRC Approval of the RS232C Data Output option applies only if used as a printer
port and the apparatus connected to the controller does not use or generate greater
than 250 Vrms.
3) FMRC Approval for Hydrogen Sulfide Sensor Module applies to Model 5100-05
electrochemical cell only. Model 5100-01 solid state sensor is not approved.
4) FMRC Approval allows the presence of MODBUS firmware in the Sentry controller
but does not cover the operation of the MODBUS firmware itself.
*FMRC: Factory Mutual Research Corporation