Sanyo DSR-2108 - Manual (Page 39)

LIVE settings
32
To set the video settings on each channel.
Select an item for each setting using the control button ({|)
and select a setting value using the control button (}~).
● Setting a CHANNEL and the channel designation
1 Select "CHANNEL" using the control button ({|)
and select a channel from the following channels
using the control button (}~), press the ENTER
button.
Selections: CH1 - CH16
☞
In DSR-2108, CH1 - CH8.
The CHANNEL screen used for channel settings is
displayed.
When not changing the designation of the channel, only
select a channel.
2 Select the input position using the control button
({|) and select input characters using the control
button (}~).
Character selection: (Refer to "DVR ID input display
list": P80)
Press the EXIT/STOP button once operations are
complete.
Changing the present CH1 display to HALL-1F
(Example).
● Setting the DISPLAY
To select "DISPLAY", and set the screen display.
ON: Displays live videos
OFF: Does not display live videos
Memo: The display of screen information, such as time and
date and channel, depends on the settings of the
OSD. (P31)
● Setting the BRIGHTNESS
To select "BRIGHTNESS" and adjust the brightness of
the videos.
The brightness of the video changes in real time.
(0 - 100 %)
● Setting the CONTRAST
To select "CONTRAST" and adjust optimally the dark
parts and bright parts of the video.
The contrast of the image changes in real time.
(0 - 100 %)
● HUE settings
To select "HUE" and adjust the hue of the video.
The hue of the images changes in real time.
(0 - 100 %)
● Setting the SATURATION
To select "SATURATION" and adjust the saturation of the
video.
The saturation of the images changes in real time.
(0 - 100 %)
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the live
screen.
Sets the alarm input/output conditions of the alarm input/
output terminal.
1 Select "ALARM-SET" using the control button
({|) and press the ENTER button.
The ALARM-SET screen is displayed.
2 Select "ALARM OUT" using the control button
({|) and set whether or not an alarm signal
should be output through this unit using the
control button (}~).
ENABLE: An alarm signal is output.
DISABLE: No alarm signal is output.
3 Select "ALARM OUT NO." using the control button
({|) and specify the alarm output terminal number
(1 - 4) using the control button (}~).
Sets the alarm output conditions of the specified
alarm output terminal.
● Setting the ALARM IN
An alarm signal is output when the specified external alarm
input terminal receives an input.
1 Select "ALARM IN" using the control button ({|).
2 Select the setting position (4 positions) using the control
button (}~).
3 Select the input terminal number (1 - 16) using the control
button ({|).
☞
In DSR-2108, input terminal number (1 - 8).
4 Press the ENTER button.
● Setting the MOTION ON
An alarm signal is output when the specified video input
terminal receives a MOTION detection signal.
1 Select "MOTION ON" using the control button ({|).
D Setting a CHANNEL
CHANNEL
H A L L - 1 F
- - - - - - - -
E Alarm input output settings
ALARM-SET
ALARM OUT ENABLE
ALARM OUT NO. 1
ALARM IN -- -- -- --
MOTION ON -- -- -- --
VIDEO LOSS ON -- -- -- --
HDD ERROR OFF
ALARM DURATION 5 SEC
ALARM IN NO. 1
TYPE ---
L8HBT_WA(DSR-2116_2108)(GB).book 32 ページ ２００９年５月２７日 水曜日 午後４時５０分