Sanyo DSR-2108 - Manual (Page 56)

49
SERVICE settings
Press the MENU button and input the ADMIN password.
The MAIN MENU is displayed, select "SERVICE" using the
control button ({|}~).
Saving the menu settings of this unit to a device, such as a
USB memory.
1 Connect the USB memory to the USB terminal.
2 Select "SAVE SETUP TO A USB" using the control
button ({|) and press the ENTER button.
The confirmation screen is displayed.
3 Select "CONFIRM" using the control button (}~)
and press the ENTER button.
The message "SAVING" is displayed and saving starts.
Once saving is complete the SERVICE screen is
displayed.
Allows to call up the menu settings of this unit saved on such
a device as USB memory onto this unit or onto a device of
identical model.
1 Connecting the USB memory containing the menu
settings to the USB terminal.
2 Select "LOAD SETUP FROM A USB" using the
control button ({|) and press the ENTER button.
The confirmation screen is displayed.
3 Select "CONFIRM" using the control button (}~)
and press the ENTER button.
The message "LOADING" is displayed and loading
starts. Once loading is complete, the unit restarts and
returns to live videos.
Select "DISK INFO" using the control button ({|) and
press the ENTER button.
The following data is displayed on the DISK INFO screen.
• Total capacity of the hard disk
• Remaining capacity of the hard disk
• Date and time of first recording
• Date and time of last recording
SERVICE
SAVE SETUP TO A USB
LOAD SETUP FROM A USB
DISK INFO
MAIN MENU
RECORD LIVE SYSTEM
HDD SET NETWORK SERVICE
USB memory
A Setting the SAVE SETUP TO A USB
B Setting the LOAD SETUP FROM A USB
C Displays the hard disk information
DISK INFO
hda size = 500GB remain=375GB
hda start time:2009.04.18.15:00:00
hda last time:2009.04.24.18:28:45
L8HBT_WA(DSR-2116_2108)(GB).book 49 ページ ２００９年５月２７日 水曜日 午後４時５０分