Sanyo DSR-2108 - Manual (Page 53)

NETWORK settings
46
• MAIL TO
To set the destination mail address.
Example:
• MAIL SERVER
Sets the mail server name, as well as the USER and
PASSWORD.
Example:
USER: To set the connection user ID for the mail
server.
PASSWORD: To set the connection password for
the mail server.
Example:
• MAIL FROM
To set the mail address sent to the destination host.
Example:
4 Press the EXIT/STOP button twice.
The screen returns to the NETWORK screen and then
press the EXIT/STOP button again.
Allows synchronizing the time using an internet or LAN NTP
server.
1 Select "NTP SET" using the control button ({|),
select "ON" using the control button (}~) and
press the ENTER button.
The NTP SET screen is displayed.
• ON: Use NTP server to adjust time
• OFF: NTP server not used for adjusting time
2 Select the following item using the control button
({|) and press the ENTER button.
Set the NTP server address using the control buttons
({|}~) and press the ENTER button.
• NTP SERVER ADDRESS1
• NTP SERVER ADDRESS2
3 Select "TIMEZONE" using the control button ({|)
and the time zone using the control button (}~).
Selections: GMT –1:00 to –12:00, 0:00 to 13:00
4 Select "TIME TO SYNCHRONIZE" using the control
button ({|) and the time to synchronize using the
control button (}~).
Selections: 00, 01, 02 - 23
Press the EXIT/STOP button to return to the
NETWORK settings screen.
F
MAIL TO
@ s a n y o . c o m
- - - - - - - - - - - - - -
- - - - - - - - - - - - - -
- - - - - - - - - - - -
MAIL SERVER
m a i l s e r v e r 1 2
- - - - - - - - - - - - - -
- - - - - - - - - - - - - -
USER
2 3 4 5 6
- - - - - - - - - - - - - -
- - - - - -
PASSWORD
2 0 0 6 0 9 1 5
- - - - - - - - - - - - - -
- - - - - -
MAIL FROM
1 1 1 @ A B C . c o m
- - - - - - - - - - - - - -
- - - - - - - - - - - - - -
- - - - - - - - - - - -
G Setting the NTP SET
NTP SET
NTP SERVER ADDRESS1 0.0.0.0.
NTP SERVER ADDRESS2 0.0.0.0.
TIME ZONE GMT +9:00
TIME TO SYNCHRONIZE 01:00
L8HBT_WA(DSR-2116_2108)(GB).book 46 ページ ２００９年５月２７日 水曜日 午後４時５０分