Sanyo DSR-2108 - Manual (Page 62)

55
Main screen basic operations
Allows you to select the display mode for live and playback
video.
b Single-screen display
Click the channel selection button on the operation panel or
select one screen and double-click.
The video of the specified camera is displayed in
single-screen.
Memo: Double-clicking on a single-screen display returns the
previous screen display.
b Quad-screen display
Click the quad-screen display button on the operation panel.
The video of the cameras connected to this unit is displayed
on quad-screen.
Memo: Each time the button is clicked the video of the next
four channels is displayed in order of the channel
numbers.
☞
In DSR-2108, the unit of 4 screens, 1 to 4 and 5 to 8,
are displayed in sequence.
b Multi-screen display
Click the multi-screen display on the operation panel.
The video of the cameras connected to this unit is displayed
on multi-16 screen or multi-9 screen.
☞
In DSR-2108, the only available multi-screen is multi-8
screen.
Memo: Each time the button is clicked the display switches in
turn from the multi-16 screen to the multi-9 screen (2
patterns) video.
Memo: <About selecting a camera video>
If a live video is selected (clicked) on the quad-screen
or multi-screen display, a red frame appears around
the live video to indicate that it is selected.
It is necessary to select a camera to perform the
following operation in quad-screen or multi-screen.
• Saving images (P57)
• PTZ dome camera operations (P58)
• Switching the audio output (
5 Audio controller: P54)
A Switching the display mode of the screen
06 05
08 07
02 01
04 03
14 13
16 15
10 09
12 11
12
16
03 04
13 14 15
07 08
09 10 11 12
03 02
05 06
01
04
07 08 09
03 02
05 06
01
04
07 08 09
12 11
15
01 02
01 02
05 06
10
13 14
16
L8HBT_WA(DSR-2116_2108)(GB).book 55 ページ ２００９年５月２７日 水曜日 午後４時５０分