Sanyo DSR-2108 - Manual (Page 79)

Remote Setup
72
Settings related to the system and time.
b Setting the System
1 DVR ID (P37)
Sets individual designation to DVRs.
2 Admin Password (P38)
This is a password for performing menu settings on the
DVR unit.
Memo: The default value is "1111".
3 User Password (P39)
This setting is used to give controlled operational access
to administrators and general users. The operations with
User Password are limited to search and playback.
Memo: No user password is set by factory default.
4 Network Password (P39)
This password is for limiting the access to the network.
Memo: The default value is "1111".
5 Date Format (P9)
Sets the date display format.
6 Language (P11)
Sets the display language.
7 Remote Controller (P41)
Allows to set an ID number (1 - 99) on the supplied remote
control for its identification.
Memo: If set to the default value (0), no ID number is
necessary for performing remote operations.
b Clock Set
1 Set Date & Time (P9)
Sets the current date and time.
2 D.S.T./SUMMER TIME (P10)
Sets whether daylight saving is applicable or not.
• OFF: Daylight saving not applicable
• U.S.A.: USA daylight saving time applicable
• EU: EU daylight saving time applicable
Select the GMT Area.
(+00:00 to +05:00)
• OTHER: Allows to set the start and end dates of the
daylight saving period for time zones other
than USA and EU.
(Begin/End)
Memo: A confirmation dialog is displayed when [Apply] (or
[OK]) is clicked if the date and/or time settings have
been changed.
The DVR is restarted and the date and time updated
when [YES] is clicked on the confirmation dialog.
F System settings
1
2
3
4
5
6
7 1
2
L8HBT_WA(DSR-2116_2108)(GB).book 72 ページ ２００９年５月２７日 水曜日 午後４時５０分