Symmetricom XL-GPS - Manual (Page 135)

997-01530-01, Rev. C-25, Jan 2008 125
2
5
1
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
For the XL-GPS, groups 1, 2, 3, 4 and 5 have been deprecated and a new group 6, products, has been
added. For the XL-GPS and future Symmetricom products, groups 1 through 5 will be absent from the
XL-GPS Enterprise MIB definition supplied with the unit. The top structure for the XL-GPS is:
Note : For the figures in this chapter, substitute “xlgps” for “xli”.
The level under the XL-GPS group is divided into three groups; the first two of which will be explained
later. The optionCardGroup has all the available option cards under it.
The current traps message group is located under the fault. The ntp group is under the xlGpsMainCard
group as an option, and is related only to NTP on the standard network port on the XL-GPS’s Main CPU
card.
This MIB structure also provides a useful definition for the system object ID. SNMP managers may use
the system object ID to identify the class of object being accessed. With this structure, the system object
TrueTimeEnt
= 1896
products
= 6
xli
= 1
xliSystem
= 1
xliMainCard
= 2
systemFault
= 1
ntp
= 1 systemStatus
=2
Additional
Products
xliOptionCards
= 3
Additional
Option
Cards
systemAlarmData
= 1
systemFault
Config
= 2
systemFault
History
= 3
systemStatus
General
= 1
systemStatus
Detail
= 2
xliTrap
= 0