F6 - keypad lock, F6 – keypad lock, Command line – Symmetricom XL-GPS User Manual
Page 51: If f5 is enabled, xl-gps responds (example), If f5 is disabled, xl-gps responds, Xl-gps responds, F5<cr, F5 disable<cr><lf, Ok<cr><lf, F5 disable<cr
997-01530-01, Rev. C-25, Jan 2008
41
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
For example, to display the time quality status and flags, enter:
F5<CR>
If F5 is enabled, XL-GPS responds (example):
F5 ENABLE 00000001000 00000010000 00000100000 00001000000<CR><LF>
If F5 is disabled, XL-GPS responds:
F5 DISABLE<CR><LF>
To enable time quality reporting, and change the thresholds of the time quality flags, enter:
F5 ENABLE 2000 20000 200000 2000000<CR>
XL-GPS responds:
OK<CR><LF>
Note:
Leading zeros aren’t required when entering new settings. They are displayed in the readouts.
To disable time quality reporting:
F5 DISABLE<CR>
XL-GPS responds:
OK<CR><LF>
F6 – Keypad Lock
F6 – Keypad Lock enables or disables the keypad, preventing accidental changes to the XL-GPS’s
settings. When enabled, the display responds ‘KEYPAD LOCKOUT BY FUNC 6’ when the user attempts
to access any function other than F6. F6 remains available through the keypad at all times. The factory
setting for F6 – Keypad Lock is disabled.
Command Line
To display the Keypad Lock status, send:
F6<CR>
XL-GPS responds:
F6<S><STATE><CR><LF>