The xl-gps responds, F73<sp>threshold<sp><nanoseconds><sp>ns<cr><lf, F73<sp>threshold<sep><nanoseconds><cr – Symmetricom XL-GPS User Manual
Page 81: Ok<cr><lf, F73<sp>timeout<cr><lf, F73<sp>timeout<sep><seconds><sp>s<cr><lf, F73<sp>timeout<sep><seconds><cr><lf, F73<sp>blink<sep>enable<cr, F73<sp>blink<sep>disable<cr
997-01530-01, Rev. C-25, Jan 2008
71
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
The XL-GPS responds:
F73<SP>THRESHOLD<SP><nanoseconds><SP>ns<CR><LF>
where <nanoseconds>is the time error threshold in nanoseconds, between 0 and 9999.
To set Time Error Threshold, enter a string the following format:
F73<SP>THRESHOLD<SEP><nanoseconds><CR>
The XL-GPS will set the new time error threshold and returns the following string if the command is
successful.
OK<CR><LF>
Set or query Timeout Delay using the TIMEOUT command. To query the current setting, enter:
F73<SP>TIMEOUT<CR><LF>
The XL-GPS responds:
F73<SP>TIMEOUT<SEP><seconds><SP>s<CR><LF>
where <seconds>is the timeout in seconds, between 0 and 86400.
To set Timeout Delay, enter a command string in the following format:
F73<SP>TIMEOUT<SEP><seconds><CR><LF>
The XL-GPS will set the new timeout delay and responds:
OK<CR><LF>
Led blinking can be ENABLED or DISABLED using the BLINK command. To enable LED blinking, enter:
F73<SP>BLINK<SEP>ENABLE<CR>
The XL-GPS responds:
OK<CR><LF>
To disable LED blinking, enter:
F73<SP>BLINK<SEP>DISABLE<CR>
The XL-GPS responds:
OK<CR><LF>