Schneider Electric ALTIVAR 58 TRX - Manual (Page 117)

Altivar ® 58 TRX AC Drives
Type H Specifications
117
09/2003 © 2000–2003 Schneider Electric All Rights Reserved
Analog output AO1 X–Y mA analog output, with X and Y programmable from 0–20 mA.
Factory setting: 0-20 mA.
Maximum load impedance: 500
Ω
Resolution: 0.04 mA (9 bits)
Linearity: +/- 0.2 mA
Accuracy: +/- 0.2 mA
The analog output is updated every 2 mS, maximum.
Logic inputs LI 4 assignable logic inputs with impedance 3.5 kW, compatible with PLC level
1, standard IEC 60065A-68.
Maximum length of shielded cable: 100 m (328 ft).
Power supply + 24 Vdc (minimum 11 Vdc, maximum 30 Vdc).
State 0 if < 5 Vdc, state 1 if
≥ 11 Vdc.
Sampling time: 2 ms maximum.
Other inputs: see option cards.
Logic outputs LO 2 relay logic outputs for R1 (fault relay) and R2 (assignable).
Form C, 1 N.O., 1 N.C. contact protected against overvoltages (relay R1).
1 N.O. contact protected against overvoltages (relay R2).
Minimum switching capacity: 10 mA for 24 Vdc.
Maximum switching capacity: on a resistive load (cos
ϕ = 1): 5 A for 250 Vac
or 30 Vdc; on an inductive load (cos ϕ = 0.4 and L/R = 7 ms): 1.5 A for 250
Vac or 3 0 Vdc.
Other outputs: see option cards
Communication RS 485 multidrop serial link with simplified Modbus protocol as part of the
standard product.
Transmission speed: 19200 bps, no parity
Use: connecting a terminal (option), microprocessor card, a PC (option), or
connecting one or more PLCs.
Codes and standards UL Listed per UL 508C as incorporating electronic overload protection:
UL File E164874 CCN NMMS
ATV58HU09M2 to D46M2
ATV58HU18N4 to D79N4
ATV58HC10N4X to C33N4X
CSA Certified to CSA C22.2 No. 14.
CSA File LR96921 Class 3211 06
ATV58HU09M2 to D46M2
ATV58HU18N4 to D79N4
CE Marked
Conforms to applicable NEMA ICS, NFPA, IEC, and ISO 9001 standards.
Electrical Specifications (Continued)