Schneider Electric ALTIVAR 58 TRX - Manual (Page 5)

Altivar ® 58 TRX AC Drives
User Interface Options and Accessories
5
09/2003 © 2000–2003 Schneider Electric All Rights Reserved
USER INTERFACE OPTIONS AND ACCESSORIES
Keypad Display
The operator keypad display can be mounted directly to the drive or
connected via a remote mounting kit. It can be used to operate the drive, or
to display, configure, and adjust parameters. It can also be used to upload
and download configurations.
PowerSuite™ Software
This Windows ® -based PC and Pocket PC software can be used to display,
configure, and adjust parameters as well as upload and download
configurations. It can also be used to operate the drive and view fault history.
The software may be used in a stand-alone mode to create or modify a
configuration and transfer it to an ATV58 TRX drive controller.
I/O Option Boards
A variety of option boards are available to expand the I/O to match the needs
of the installation. The option boards mount internally without requiring
additional panel space.
Communication Option Boards
Individual communication cards are available to integrate the ATV58 TRX
drive controller into many industrial and building automation communication
protocols. These allow the user to control, adjust, and obtain the status of an
ATV58 TRX drive controller. The communication card mounts internally
without requiring additional space.
PowerSuite Software
I/O Option Boards
IO
_
c a rd
s .t if
Communication Option Boards
C
o m
C
a
rd
s .tif
Keypad Display (Left) and
Remote Mounting Kit (Right)
k e
ypa
d ph
ot
o .t
if
PC
C
o
n n
Ki
t.ti
f
O
p In
te
rf a
c e N
e w
.ti
f