Server Technology PP02 - Manual (Page 11)

A sample session, Power-ON Mode:
1 The user makes a modem call to the phone number of the line attached to the Power On/Off +Aux control unit.
2 The Power On/Off +Aux unit detects the incoming RINGs and counts them. After the first ring, the Power On/Off
+Aux signals the IPM to power-ON the host PC and peripherals.
3 The line continues to ring as the PC is booting. A command in the PC's AUTOEXEC.BAT or Startup folder loads
the host/communications software (i.e. pcANYWHERE, HyperAccess, etc.), or the host program loads per its own
"launch at startup" option (through modification of the registry). The modem is initialized into answer mode.
4 The modem answers the incoming call and a connection is made. The Power On/Off +Aux sees the OFF-HOOK
condition present on the line, indicating that the line is in-use, and keeps the power ON for the duration of the call.
5 When the user is finished and ends the session, the modems disconnect (hang-up) and the ON-HOOK condition is
detected. The IPM is signaled to power-OFF.
This scenario describes a remote session using the Remote Power On/Off according to its factory default settings. There
are many interesting options to supplement using the system in other ways. See the Sample Session section for more
examples.
Remote Power On/Off Product Overview • 11