Server Technology PP02 - Manual (Page 13)

NOTE: UPS users must attach the wall-mount power supply to a second backed-up outlet provided on the back of the
battery back-up. If not, a power outage will result in the PC powering off because the IPM will switch off if the Power
On/Off +Aux unit looses power. Do not plug the power supply into an outlet that is switched on/off by the IPM.
Insert the free end of the IPM signal cable into the port labeled "IPM P ORT ". The square "ON/OFF" switch should now
control the IPM. Press the switch once - the LED should illuminate, the IPM should activate, and the PC and peripheral
devices should power-ON. Press the switch again - the devices should power-OFF. This is now the Master switch for
turning the PC on and off.
Connect the telephone cable from the wall jack to the control unit's "L INE " port. Attach a second cable from the control
unit's "M ODEM " port to the modem. The telephone line now passes through the Power-On/Off +Aux unit to the modem.
Before installing Remote Power On/Off:
PC
OFF ON
ON OFF
Power/Surge Strip
Telephone Cable
To
Modem
Line-In
Telephone
Wall Jack
Modem
Power
Supply
ON OFF
ON
OFF
ON
MR
TR
SD
RD
OH
CD
AA
HS
Remote Power On/Off Installation • 13