Server Technology PP02 - Manual (Page 25)

Example DIP Switch Configurations, RE BOOT Mode: Power is normally ON; RE BOOT = Power-OFF,
30 second delay, Power-ON.
No Answer reBOOT
Minimum unanswered RINGs
required to initiate reboot = 8
No Answer reBOOT
Minimum unanswered RINGs
required to initiate reboot = 1
No Answer reBOOT
Minimum RINGs required = 1
2 hour Off-Hook limit Enabled
On-Hook reBOOT
Minimum Ring-Count if call
is not answered = 8
On-Hook reBOOT
Minimum Ring-Count if call
is not answered = 1
On-Hook reBOOT (reboot on hang-up)
Minimum Ring-Count = 1
2 hour Off-Hook limit Enabled
+Aux Port reBOOT (secure method)
One RING to 'prime', wait 10 seconds;
Minimum RINGs to reboot (2nd call) = 8
+Aux Port reBOOT (secure method)
One RING to 'prime', wait 10 seconds;
Minimum RINGs to reboot (2nd call) = 1
+Aux Port reBOOT (secure method)
One RING to 'prime', wait 10 seconds;
Minimum RINGs to reboot (2nd call) = 1
2 hour Off-Hook limit Enabled
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8 ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8 ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
Remote Power On/Off RE BOOT Mode • 25