Server Technology PP02 - Manual (Page 54)

The Power Options Properties screen will appear. Click the UPS tab. The Power Options Properties screen will appear
similar to the screen capture down below (on the left).
2) Press the ‘Select...’ button to proceed to the UPS Selection screen (shown below, right)
3) On the UPS Selection screen specify "Generic" as the manufacturer type. Next, click on “Custom” in the ‘Select
model:’ field, then proceed to choose the appropriate COM port. Be sure to specify the correct COM port; failure to
specify the correct port may result in a bootup>shut down loop that will require booting into safe mode to correct. Note
that ‘COM1’ in the sample screen below is only an example and may not be correct for your system.
Press ‘Next >‘ when you are finished with your selection. The UPS Interface Configuration screen will appear (shown
next page).
Remote Power On/Off Appendix C | Windows NT/2000/XP ShutDown • 54