Server Technology PP02 - Manual (Page 28)

+Aux Feature
The +Aux feature allows a single telephone line to be shared by a modem, the Power On/Off +Aux system, and one other telephone device,
such as a facsimile machine or answering machine - which is attached to the A
UX port. This feature also provides (with or without an
auxiliary device attached) a unique level of security for the Power-ON Mode or RE BOOT Mode
With the +Aux Feature enabled, routine incoming calls are routed to the auxiliary port device while modem access and power controls are
safely disguised. Only a secure 'secret' method will activate power controls and allow access to the modem.
Note: Power On/Off +Aux's line-sharing feature requires that both devices, modem and auxiliary, be capable of answering on ring number
three (3) or greater; if the modem and/or auxiliary device answer after only one (1) or two (2) rings, it will not be possible to share the line.
DIP Switch #7
DIP switch 7 controls the +Aux Feature. The specific functions of other DIP switches are not altered. To enable the
+Aux Feature place switch 7 in the ON (down) position:
1 2 3 4 5 6 7 8
ON
Installing an Auxiliary Device
The rear panel of the Power On/Off +Aux control unit contains an RJ-11 telephone jack labeled "A UX ". This jack allows
a second analog telephone device to be used on the same line as the modem.
To connect a secondary (auxiliary) device, insert one end of a standard telephone cable into the port labeled A UX , and the
other end into the telephone device.
If the device is an automatic answering device, like a facsimile or answering machine, it must be configured to wait
at least three (3) rings before it will answer. Refer to the auxiliary device's operations manual for specific instructions.
Remote Power On/Off +Aux Feature • 28