Seiko Group SII IP-6600 - Manual (Page 115)

2-71
Section 2 Basic Operations
Cleaning outer case
If the outer case of printer was stained, wipe up stain with soft cloth
soaked in water or water downed neutral detergent and wringed well.
- Turn OFF the printer power switch before cleaning.
- Do not use volatile solvent such as thinner and benzine to
prevent fade or detoriation of printing.
Cleaning rear cover and paper feed
Vacuum dust with a vacuum cleaner.
If stains are heavilly accumulated, wipe up them with soft cloth
soaked in the cleaning liquid.
- Turn OFF the printer power switch before cleaning.
- Do not blow off paper dust.
If doing so, print quility gets bad influence.
NOTE
NOTE
- Do not leave the printer without maintenance liquid charge
more than 2 weeks in power off state for head protection.
- When leaving the printer more than one month, consult
with shops or our nearest service office in advance.
Paper feed
Rear cover
When leaving the printer in power off for more than one month
Regardless of performing the service cleaning, a service call error
message will be displayed on the operation panel.
Contact SIIT service centers.
NOTE
Inspection & Maintenance