Seiko Group SII IP-6600 - Manual (Page 152)

3-35
Section 3 Operation Panel Menu Operations
F.ADJ Menu
This menu is used to set paper feed adjustment parameters.
When the
key is pressed, parameters can be set.
(1) Paper feed adjustment pattern
Prints a pattern for adjusting the paper feed amount.
Two pattern parameters are available, ROUGH that prints the paper
feed amount adjustment pattern at every 0.25% step between 99.0
and 101.0 %, and DETAIL that prints the paper feed amount
adjustment pattern at every 0.06% step between current setting
value ±0.12%.
Obtain approximate value with the ROUGH parameter, and
determine the setting value with the DETAIL parameter. Select a
proper parameter according to the print mode.
Press the
key during print to stop the print.
<Parameter (Enter a choice)>
- ROUGH (NORMAL):
Select at adjustment in standard and high speed print modes.
- ROUGH (H-QUAL):
Select at adjustment in high quality print mode.
INK ENTRY
PAPER F.ADJ
#FEED PATTERN
>01 : ROUGH 1
# FEED PATTERN
>ROUGH (NORMAL)
Menu Operations