Seiko Group SII IP-6600 - Manual (Page 154)

3-37
Section 3 Operation Panel Menu Operations
(3) Back feed adjustment pattern
Prints a pattern for adjusting a paper back feed amount.
Select a proper parameter according to the print mode.
<Parameter (Enter a value)>
- NORMAL:
Select at adjustment in standard and high speed print modes.
- H-QUALITY:
Select at adjustment in high quality print mode.
- H-DENSITY:
Select at adjustment in high density print mode.
- DRAFT:
Select at adjustment in draft print mode.
(4) Paper back feed correction value (unit: pulse)
Input a correction value of the paper back feed based on the result
of the back pattern.
<Parameter (Enter a value)>
±2000 pulse (±5 mm)
1 pulse=2.5µm
# BACK PATTERN
>NORMAL
# BACK ADJUST
>+0000 PULSE
Menu Operations