Seiko Group SII IP-6600 - Manual (Page 142)

3-25
Section 3 Operation Panel Menu Operations
*The color stripe is printed on the test print regardless of this setting.
(18) Head action mode setting (HEAD MOTION)
Selects a head action mode.
<Parameter (Enter a choice)>
- NORMAL:
Use this usually.
- HIGHLIGHT: Use this for print gradation data.
#HEAD MOTION
>01 : NORMAL
#HEAD HEIGHT
>01 : NORMAL
Menu Operations
If the color stripe is not set, the print dot-off may occur.
It is recommended to set the color stripe for printing, if
practicable.
NOTE
If a pattern having very low printing rate in even one color is
printed continuously at high temperature, the print dot-off may
occur in low printing rate color. In this case, set the head
mode to HILIGHT PRIORITY.
NOTE
(19) Head height setting (HEAD HEIGHT)
Selects a head height setting. This setting will be matched to the
head height lever setting.
<Parameter (Enter a choice)>
- NORMAL: Use this usually.
- HIGH:
Use this for thick media.