Seiko Group SII IP-6600 - Manual (Page 148)

3-31
Section 3 Operation Panel Menu Operations
2) Select a copy destination
A numeral on the left side is the
copy source number.
The parameter can be changed
with the
, key.
(For the copy destination
number, 01 - 20 are displayed)
If the copy destination has
already been registered, * is
displayed following a numeral.
Press the key to determine
the copy destination parameter.
If the copy destination is newly
registered, * is not displayed
following a numeral.
Press the key to execute
the parameter copy operation.
- If the key is pressed in the midway of each menu
operation, the first menu comes back.
# COPY DEST
> 13→01 *
# COPY DEST
* 13→01 *
# COPY DEST
* 13→20
# COPY DEST
* 13→20 OK?
Key
, Key
# COPY DEST
* 13→20 *
Key
Key
Menu Operations
NOTE