Seiko Group SII IP-6600 - Manual (Page 53)

2-9
Section 2 Basic Operations
Turning the Power Off
<Printer>
1
Turn OFF the power ON/OFF switch on the operation
panel for a couple of seconds.
The above message is displayed on the LCD to indicate that a
shutdown process is in progress. After the process ends, the power
is turned OFF.
If the power off state lasts for a short time, you may turn the power
off, skipping the fill cap operation by pressing the power ON/OFF
key while pressing the
key.
Performing the fill cap operation is recommended.
- The printer switch on the rear of the printer should be used
only when the printer is turned OFF completely in order to
move it, connect it with a computer, install or maintain its
parts.
- Turn the power ON/OFF switch OFF, wait for at least ten
seconds, then turn it ON again.
- The printer performs fill cap operation to keep the good
head condition at first 20 hours after print wait state and
every 3 days.
It is recommended to keep the printer ON.
SHUTDOWN
WAIT A MOMENT
CAUTION
Turning the Power On/Off