Now you can see – SVAT Electronics CLEARVU10 User Manual
Page 15
15
CLEARVU10
SVAT ELECTRONICS
now you can see
CONNECTING A MICROPHONE (NOT INCLUDED) FOR 2 WAY COMMUNICATION
If you connect a microphone to one of the AUDIO IN jacks, you can communicate with computers
that are remotely connected to the DVR. After connecting the microphone, simply enable
live audio and the channel which it is connected to (see pg.43 for more information on audio
settings). Audio will be transmitted to the connected PC until the LIVE AUDIO setting is turned
to OFF, or the microphone is disconnected.
NOTE: Only one audio device can be equipped per channel. For example, you can not have an
audio equipped camera and a microphone plugged in to channel 1 at the same time.
CONNECTING A TV/EXTERNAL SPEAKER (NOT INCLUDED) FOR LISTENING TO LIVE AUDIO OR 2 WAY COMMUNICATION
Connecting a TV or external speaker to the audio out jack allows you to listen to live audio from
one of your audio-equipped cameras (not included). After connecting the TV or speaker, simply
enable live audio and the channel which it is connected to (see pg.43 for more information on
audio settings). Audio will be transmitted to the speaker until the LIVE AUDIO setting is turned
to OFF, or the speaker is disconnected.
CONNECTING AN ADDITIONAL MONITOR (NOT INCLUDED)
An additional Spot-Out monitor can be connected to the DVR and configured to show
continuous video, or to display footage only when motion is detected. For detailed instructions
on setting up a Spot-out monitor and configuring settings, refer to pg.32.