SVAT Electronics CLEARVU10 - Manual (Page 41)

41 CLEARVU10
SVAT ELECTRONICS
now you can see
ADJUSTING AREA SETUP
1. Click the AREA SETUP button of the camera
you wish to change.
2. The camera will be displayed full screen and
will be orange in color with a light blue grid
covering the entire frame.
3. By default the entire frame is set to detect
motion (indicated by orange shading). To
change this, you can deselect specific areas.
4. To deselect areas, click a square on the grid
that is in the area you want to deselect.
Hold the click button down and drag the
mouse across the desired area.
5. You will see a box appear on screen as
you are dragging. Everything within this
area will NOT trigger motion recording
(indicated by blue shading). When the
area you want is inside the box, let go of
the mouse button. The squares will then
turn blue.