SVAT Electronics CLEARVU10 - Manual (Page 95)

95 CLEARVU10
SVAT ELECTRONICS
now you can see
MAKING CHANGES TO THE CAMERA MENU
The Camera Menu allows you to make the same changes to the DVR’s settings that you can make through the DVR’s “Camera” menu. The Camera
menu allows you to change each cameras title, place and remove cameras from covert mode, adjust the color, brightness, contrast, and tint settings
for each camera, set up a PTZ camera (not included), and set the motion sensitivity and motion detection areas for each camera.
NOTE: The settings in this menu and the method of changing these settings are identical to the CAMERA menu which is accessed
through the DVR. Information and instructions on how to make changes to the DVR’s CAMERA menu are outlined earlier in
the manual, and can be used as a guide to change settings via the Remote Software.
For more information on the DVR’s Record settings, please refer to CAMERA MENU, pg.34.