SVAT Electronics CLEARVU10 - Manual (Page 31)

31 CLEARVU10
SVAT ELECTRONICS
now you can see
11. When you find a preferred layout, you can
choose which cameras you want to be
displayed in which frames.
12. Right click the frame. A drop down menu
of 1-8 will display on screen.
13. Choose which camera you want to be
displayed in that particular frame.
14. When you have completed your desired layout, press ENTER. This will open up another sequence frame for you to adjust.
NOTE: If you are choosing a multi-screen display, each frame must contain a camera number or else you will not be able to press ENTER and
proceed to the next step.
15. Repeat steps 9-14 as needed, until you
create your preferred sequence display.
16. When you have completed your setup, right
click the mouse. SAVE & EXIT will save your
sequence and exit, EXIT will take you back
to the previous screen without saving your
changes, and CANCEL will take you back to
the editing menu.