SVAT Electronics CLEARVU10 - Manual (Page 34)

34 CLEARVU10
SVAT ELECTRONICS
now you can see
AUTO BRIGHTNESS: Can be set so that the LCD screen turns off after a certain period of inactivity. Recording will continue during this time. You
can set the monitor to turn off after 10, 20, 30, 40, 50 or 60 minutes. Choosing “OFF” will disable auto brightness, meaning that your
monitor will constantly remain on unless it is manually shut off.
MAIN DISPLAY OFF: When set to ON, the DVR will turn and remain off for the duration of time specified in the FROM and TO status box
underneath. When set to OFF, the LCD screen will only deactivate in accordance with the AUTO BRIGHTNESS setting, or when the screen is
turned off manually.
FROM: Only active when the MAIN DISPLAY OFF is set to ON. This is the start time for the screen saver to be activated.
TO: Only active when the MAIN DISPLAY OFF is set to ON. This is the time for screen saver to deactivate and the LCD monitor to turn back on.
TIP: You can manually turn the LCD monitor on and off by pressing on the DVR’s button panel. Recording will continue.
CAMERA MENU
The camera menu allows you to make changes
to the following: CAMERA TITLE, COLOR
SETUP, PTZ SETUP, and MOTION SENSOR.
The CAMERA TITLE menu allows you to
personalize the on-screen title of each camera
as well as whether the camera will be displayed
in covert mode. The COLOR SETUP menu is
where you to make specific changes to the
brightness, contrast, tint, and color of each
camera individually. PTZ SETUP configures
settings for PTZ cameras (not included).
MOTION SENSOR allows you to set each
camera’s sensitivity to motion.