Now you can see – SVAT Electronics CLEARVU10 User Manual
Page 69
69
CLEARVU10
SVAT ELECTRONICS
now you can see
NOTE: This menu has 3 different symbols to show the recording modes
Empty Block: No recording during this time (set to NONE)
Solid Block: Continuous Recording (set to TIMER)
Light Blue Outline: Motion Activated Recording (MOTION)
MAKING CHANGES TO THE ALARM SETUP MENU
The ALARM SETUP menu is separated into
two basic sections: SIZE/FPS/QUALITY/AUDIO,
and ACTIVATION. Changes made to the SIZE/
FPS/QUALITY/AUDIO window allows you set a
schedule and fully customize each camera to
record at specific qualities and frame rates of your
choice at any time of the day. The ACTIVATION
screen allows you to set times that the DVR will
monitor the alarm inputs and activate recording
(if triggered).
Alarm activated recording can be used in
conjunction with timer/motion recording. For
example, you can set the DVR to continuously
record an emergency exit in your building at a
low frame rate (which is configured in the TIMER/
MOTION SETUP menu) and if an alarm activates
recording, you can set the DVR to record at the highest frame rate.
NOTE: The settings and process of changing settings in the ALARM SETUP menu is identical to the settings and process of changing settings
in the TIMER/MOTION SETUP menu. For detailed instructions, please refer to pg.65 for more information.