SVAT Electronics CLEARVU10 - Manual (Page 17)

17 CLEARVU10
SVAT ELECTRONICS
now you can see
CONNECTING AND POWERING ON
1. Insert the power supply wire into the rear DC 12V port on the DVR
Insert the power cord into the power supply.
2. Plug the power cord from power supply into the power outlet.
We recommend using a surge protected power bar and/or
Uninterrupted Power Supply (UPS) backup to prevent damage to
your DVR system.
3. The DVR will power on and you will see a startup screen that
detects and checks the status of hard drives.
4. The DVR will begin normal operation and will show the default
display of all 8 channels.
NOTE: When powered on for the first time, the CLEARVU10 will automatically begin recording if cameras are connected. The DVR will
continue to record on this setting until it is manually changed to a different mode.