Smart Technologies SMART Audio 340 - Manual (Page 13)

Connecting an audio input device to your interactive whiteboard
You can connect an audio input device, such as a CD player, DVD/Blu-ray player or VCR, to your
interactive whiteboard’s External Control Panel (ECP) or Appliance Control Panel (ACP). The audio
then broadcasts from the speakers.
Connecting your paging system to the room module
You can connect your existing paging system to the room module. A page then broadcasts from the
speakers. You can configure the system to reduce the volume of all other audio input devices when a
page is broadcast.
Controlling audio inputs
You can use your microphone to mute or adjust volume of your voice, an auxiliary audio input device
or devices connected to the control unit or your interactive whiteboard.
Alternatively, you can use SMART Audio software installed on your computer to control volume.
C H A P T E R 1
Getting started
7