Smart Technologies SMART Audio 340 - Manual (Page 25)

g To set a microphone to Assigned Channel mode
1. Turn off the microphone by pressing the Mute/Power Off button for four seconds, and then wait
10 seconds.
2. Press the Soft button and the Mute/Power Off button for three seconds, and then release the
buttons.
The microphone status light flashes red rapidly.
3. If you want to set the microphone to channel 1, press the Soft button.
If you want to set the microphone to channel 2, press the Volume Up button.
The microphone status light turns solid green.
Customizing your microphone
You can customize your microphone to change some of its settings. For example, you can set your
microphone to do the following:
l
Only the Mute/Power Off button works and students are unable to adjust the volume while you
pass the microphone around.
l
The microphone turns off when you place it in a charger and turns on when you remove it.
C H A P T E R 3
Using the microphone
19