Enabling automatic shut off when charging – Smart Technologies SMART Audio 340 User Manual
Page 27
Enabling automatic shut off when charging
You can set your microphone to automatically turn off when you place it in the microphone charging
cradle and to turn on when you remove it.
g
To enable automatic shut off when charging
1. Turn on the microphone.
2. Press the Soft button and Volume Down button for five seconds.
The microphone status light flashes red, yellow and green alternately indicating that you’re now
in Local Programming mode.
3. Press the Volume Down button to change the state for the microphone Automatic On and
Automatic Off mode.
I M P O R T A N T
o
Four quick green flashes of the microphone status light indicates that the feature is on
and the microphone turns off when in the charger and turns on when removed.
o
Four quick red flashes of the light indicates that the feature is off and you must turn on
or off the microphone manually.
4. Press the Soft button and Volume Down button for three seconds to exit Local Programming
mode.
OR
Wait 30 seconds and the microphone automatically exits Local Programming mode.
C H A P T E R 3
Using the microphone
21