Smart Technologies SMART Audio 340 - Manual (Page 44)

Setting the volume during a page
For an external page to duck the SMART Audio system, the room module requires one of the
following:
l
An audio signal at the paging input (even if the page plays on speakers that aren’t part of the
SMART Audio system)
l
A signal at the 6–12V input. This is only a signal and doesn’t result in the page playing over the
SMART Audio system.
When a signal is present at the paging input, the volume of the other SMART Audio system inputs is
automatically lowered the designated amount.
g To set the speaker volume during a page
Select a ducking level in the Duck on Page drop-down list on the Paging tab.
Ducking level Volume change during a paging input
none No change
low -6 dB
medium -12 dB
high -18 dB
Setting the volume during a 6-12V input
When you apply a signal to the 6-12V input, the volume of the other SMART Audio system inputs
lowers the designated amount.
g To set the speaker volume during a 6-12V input
Select a ducking level in the Duck on 6-12v drop-down list on the Paging tab.
Ducking level Volume change during a 6-12V input
none No change
low -6 dB
medium -12 dB
high -18 dB
C H A P T E R 5
Customizing your settings
38