Smart Technologies SMART Audio 340 - Manual (Page 50)

Room module connections
The room module includes relevant connections.
g To set the relay settings
Select the preferred mode on the System Settings tab from the following table:
Setting Result
Latching Relay is active until the next pulse is received.
200 ms pulse Relay is active for 200 milliseconds.
400 ms pulse Relay is active for 400 milliseconds.
600 ms pulse Relay is active for 600 milliseconds.
g To set the relay trigger
If you want both the Soft button and the 6-12V input to trigger the relay, select either on the
System Settings tab.
If you want the Soft button to trigger the relay, select mic.
If you want the 6-12V input to trigger the relay, select 6–12v.
N O T E
If you select 6-12V input as a relay trigger, the input can also set duck audio volume on the
same signal. For more information, see Setting the volume during a 6-12V input on page 38.
C H A P T E R 5
Customizing your settings
44